100GbE connectivity has become a standard building block in modern enterprise data centers, high-performance computing environments, and large-scale campus networks. HPE Aruba switches equipped with QSFP28 interfaces support high-density 100G uplinks, spine-leaf connections, and data center aggregation. Selecting the correct optical transceiver, however, requires more than matching the QSFP28 form factor.
HPE Aruba platforms have different port configurations, supported optical modules, and minimum software requirements. A 100G QSFP28 SR4 module designed for multimode fiber has different optical characteristics from an LR4, CWDM4, DR, or ER4L module designed for single-mode fiber. Even when two modules comply with the same optical standard, their host compatibility and firmware support must be checked independently.
For network operators considering third-party 100G QSFP28 transceivers, interoperability validation should cover module recognition, electrical interface operation, optical performance, fiber compatibility, digital diagnostics, and sustained traffic transmission. C-LIGHT offers a range of 100G QSFP28 optical transceivers for different fiber types and transmission distances, providing additional options for HPE Aruba network deployment projects.
1. HPE Aruba Switches with 100G QSFP28 Interfaces
HPE Aruba provides several switch families with 100G QSFP28 ports. These platforms are used in data center aggregation, high-speed switching fabrics, enterprise core networks, and campus backbone infrastructure.
The Aruba CX 8325 and 8360 are representative platforms with QSFP28 interfaces. Their port layouts and supported transceiver configurations vary by model, so compatibility should be checked against the exact product SKU rather than the family name alone.
| Switch Series | 100G Interface Characteristics | Deployment Role | Compatibility Consideration |
|---|---|---|---|
| Aruba CX 8325 | QSFP28 ports on applicable models | Data center spine, aggregation and core switching | Check the exact 8325 model and supported transceiver list. |
| Aruba CX 8360 | QSFP28 ports on applicable models | Data center and enterprise aggregation | Port configuration and minimum AOS-CX release vary by module. |
| Aruba CX 8325H | QSFP28 interfaces on applicable hardware variants | High-density enterprise and data center switching | Check model-specific support for each optical SKU. |
| Aruba 10000 | QSFP28-capable configurations | Data center switching and high-performance networking | Consult the current transceiver guide for exact module support. |
For example, the Aruba CX 8325-32C provides QSFP+/QSFP28 interfaces for 40G and 100G connectivity. Certain 8325H configurations also provide QSFP28 ports alongside SFP28 interfaces.
The number of available 100G ports, port numbering, and supported breakout configurations depend on the specific hardware model. Engineers should identify the complete switch SKU before preparing a transceiver compatibility list.
2. HPE Aruba 100G QSFP28 Optical Transceiver Types
100G QSFP28 transceivers support several optical architectures. The main differences involve fiber type, wavelength arrangement, connector, and transmission distance.
| Optical Type | Wavelength / Architecture | Fiber Type | Connector | Typical Reach |
|---|---|---|---|---|
| 100G SR4 | 4 × 850nm | MMF | MPO/MTP | 70m OM3 / 100m OM4 |
| 100G SR1.2 | Short-reach parallel optics | MMF | LC | Up to 100m, model-dependent |
| 100G LR4 | 4 × LAN-WDM/CWDM-range channels | SMF | Duplex LC | 10km |
| 100G CWDM4 | 4 × CWDM wavelengths | SMF | Duplex LC | 2km |
| 100G ER4L | 4 × LAN-WDM channels | SMF | Duplex LC | 40km |
| 100G DR | 1310nm single-wavelength parallel lanes | SMF | Duplex or multi-fiber interface, depending on implementation | 500m for applicable DR modules |
| 100G FR1 | 1310nm single-wavelength PAM4 | SMF | Duplex LC | 2km |
These are representative optical categories rather than a universal list of modules supported by every Aruba switch. Actual compatibility depends on the exact HPE product number, switch platform, software release, and port configuration.
For example, SR4 uses parallel optical transmission over multimode fiber, while LR4 and CWDM4 use wavelength multiplexing over single-mode fiber. Although both can deliver 100GbE through a QSFP28 interface, their optical paths and cabling requirements are different.
3. HPE Aruba 100G SR4 Compatibility
100G QSFP28 SR4 is designed for short-distance 100GbE connections over multimode fiber. It uses four independent 25Gbps-class optical lanes at approximately 850nm, with an MPO/MTP interface for parallel transmission.
The HPE Aruba Networking JL309A is a representative 100G QSFP28 MPO SR4 transceiver. It is designed for short-reach multimode applications and supports up to 70m over OM3 or 100m over OM4 under the applicable specifications.
| Parameter | 100G SR4 Characteristics |
|---|---|
| Form factor | QSFP28 |
| Data rate | 100GbE |
| Optical wavelength | 850nm |
| Optical architecture | 4 transmit and 4 receive lanes |
| Fiber type | Multimode fiber |
| Connector | MPO/MTP |
| Typical reach | 70m OM3 / 100m OM4 |
| Common application | Rack-to-rack and switch-to-switch data center connections |
When replacing JL309A with a third-party SR4 module, the following points should be validated:
QSFP28 mechanical and electrical interface compatibility.
100GBASE-SR4 optical characteristics.
850nm multimode optical transmission.
MPO/MTP connector type and fiber polarity.
OM3 or OM4 fiber grade and supported transmission distance.
Switch recognition and digital diagnostic functionality.
Stable 100GbE link operation under traffic.
SR4 compatibility also depends on the installed fiber plant. An MPO/MTP connection with incorrect polarity or an unsuitable fiber arrangement can prevent a link from establishing even when both transceivers are operating normally.
4. HPE Aruba 100G LR4 and CWDM4 Compatibility
For longer links over single-mode fiber, 100G LR4 and CWDM4 are common QSFP28 optical choices. Both use duplex LC connectors, but their wavelength plans, optical budgets, and transmission distances differ.
The HPE Aruba JL310A is a 100G QSFP28 LR4 module designed for 10km single-mode transmission. R0Z30A is a 100G QSFP28 CWDM4 module designed for 2km single-mode links.
| HPE Aruba SKU | Optical Standard | Fiber | Connector | Distance |
|---|---|---|---|---|
| JL310A | 100G LR4 | SMF | Duplex LC | 10km |
| R0Z30A | 100G CWDM4 | SMF | Duplex LC | 2km |
LR4 uses four optical wavelengths in the LAN-WDM range, while CWDM4 uses four CWDM channels. Both combine multiple optical channels into a duplex LC fiber connection.
Interoperability testing should confirm that both endpoints use compatible optical standards. An LR4 module should not be treated as interchangeable with a CWDM4 module merely because they share the QSFP28 form factor and LC connector.
For third-party replacements, engineers should verify wavelength specifications, transmitter output, receiver sensitivity, optical power budget, and the required link distance.
5. HPE Aruba 100G ER4L, DR and FR1 Compatibility
Aruba's 100G QSFP28 portfolio also includes extended-reach and single-wavelength optical options. These modules address different network requirements, from longer campus and metro links to more recent single-wavelength 100G architectures.
| HPE Aruba SKU | Optical Type | Fiber | Reach | Typical Application |
|---|---|---|---|---|
| JL743A | 100G ER4L | SMF | 40km | Extended-reach optical connectivity |
| S3N88A | 100G DR | SMF | 500m | Short-reach single-mode links |
| S3N89A | 100G LR | SMF | 10km | Single-mode Ethernet links |
| R9B63A | 100G FR1 | SMF | 2km | Single-wavelength data center links |
| S4B44A | 100G SR1.2 BiDi | MMF | 100m | Short-reach multimode links |
These product numbers are examples from HPE Aruba's published transceiver portfolio. Their availability and minimum software requirements vary by switch family and hardware revision.
Single-wavelength DR and FR1 modules should not be assumed to interoperate with LR4 or ER4L modules. Their modulation, optical lane architecture, and receiver requirements differ. Both ends of a link should use compatible optical standards unless a specifically supported interoperability arrangement is documented.
6. Aruba Switch Models and Software Compatibility
HPE Aruba compatibility is platform-specific. A transceiver listed for one Aruba CX switch may not be supported on another platform, even when both devices provide QSFP28 ports.
The following examples illustrate why software version and hardware identification matter.
| Switch Platform | Example Supported 100G Modules | Published Minimum Software Examples |
|---|---|---|
| Aruba CX 8325 | JL309A, JL310A, R0Z30A, JL743A, S3N88A, S3N89A | Varies by module; examples include 10.06.0001 for JL310A and 10.10.1000 for selected newer modules. |
| Aruba CX 8360 | JL309A, JL310A, R0Z30A, JL743A, R9B63A, S3N88A, S3N89A | Varies by module and hardware generation; examples include 10.06.0001 for JL310A and 10.13.1010 for selected DR/LR modules. |
| Aruba CX 8325H | Selected 100G QSFP28 modules, including LR4, CWDM4, ER4L, DR and LR variants | Some newer module support requires 10.15.1001 or later; specific TAA and newer products may require later releases. |
The software versions above are examples from HPE Aruba's transceiver compatibility documentation, not a universal minimum release for every switch or every module. Always consult the latest guide for the exact hardware SKU and transceiver part number.
For example, HPE Aruba documentation lists JL310A LR4 support on selected CX 8325 and 8360 platforms from specified software releases. Other transceiver types, including newer DR and FR1 modules, have their own platform and software requirements.
7. Third-Party 100G QSFP28 Transceiver Interoperability
Third-party 100G QSFP28 transceivers are often considered for network expansion, replacement projects, and multi-vendor environments. The optical module may comply with the relevant Ethernet standard and QSFP28 MSA requirements, but the switch still needs to recognize and operate with its identification and management information.
Compatibility evaluation should separate three different questions:
Mechanical compatibility: Does the module fit the QSFP28 cage and meet the applicable mechanical requirements?
Electrical and management compatibility: Does the host recognize the module, establish the electrical interface, and read the expected management information?
Optical interoperability: Can the two endpoints establish a stable link using matching optical standards and fiber infrastructure?
A module can meet the optical requirements but still encounter a host-recognition or software compatibility issue. Conversely, a switch may recognize the module while the optical link fails because of mismatched wavelengths, fiber type, polarity, or link budget.
For third-party modules, network engineers should record the exact module part number, coding profile, hardware revision, switch model, port number, and software release during validation. This makes test results repeatable and useful for future deployments.
8. 100G QSFP28 Breakout and Port Configuration
Some HPE Aruba QSFP28 ports support breakout operation, allowing a 100G interface to be divided into multiple lower-speed interfaces. A common configuration is 100G to 4 × 25G, depending on the switch model and port capabilities.
Breakout operation is not supported on every QSFP28 port. The available configurations depend on the hardware platform, port mode, transceiver or cable type, and software release.
| Configuration | Interface Arrangement | Typical Application | Validation Requirement |
|---|---|---|---|
| 100G native | 1 × 100G | Switch-to-switch uplink | Confirm native QSFP28 port operation. |
| 100G to 4 × 25G | 4 × 25G SFP28 interfaces | Server or switch aggregation | Confirm port breakout support and correct cable or optical assembly. |
| 100G SR4 optical breakout | Parallel optical lanes mapped to separate links | Short-reach data center connectivity | Verify MPO polarity, breakout harness, and endpoint configuration. |
AOS-CX supports a split command on applicable 100G QSFP28 ports, but the exact behavior depends on the switch platform and software release. Some older software versions also require configuration to be saved and the switch to be rebooted before the split operation takes effect.
Before deploying a breakout configuration, engineers should verify the supported port list in the hardware guide and confirm that the remote interfaces use the correct speed and optical configuration.
9. C-LIGHT 100G QSFP28 Optical Transceiver Solutions
C-LIGHT offers a range of 100G QSFP28 optical transceivers for multimode and single-mode fiber applications. The product family includes SR4, PSM4, CWDM4, LR4, ER4, ZR4, and extended-distance variants, providing options for data center connections, enterprise networks, telecommunications, and data center interconnect applications.
For HPE Aruba replacement and network expansion projects, the optical type should be selected according to the original module specification, fiber infrastructure, required distance, and target switch compatibility.
The C-LIGHT 100G QSFP28 product series includes the CL100GQSFPSR4 module, designed for 100GbE short-reach connectivity over multimode fiber.
Data rate: 100Gbps
Wavelength: 4 × 850nm
Fiber: Multimode fiber
Connector: MPO
Distance: Up to 100m on OM4 fiber
Application: Data center and short-reach switch interconnection
This product is relevant to SR4-based network requirements. Verify the HPE Aruba switch's supported transceiver list and the actual MPO fiber configuration before deployment.
Product datasheet: CL100GQSFPSR4 100G QSFP28 SR4.
The C-LIGHT CL100GQSFPCLR4 100G QSFP28 LR4 is designed for 100GbE connections over single-mode fiber.
Data rate: 100G-class, 103.1Gb/s aggregate rate
Wavelengths: 1270nm, 1290nm, 1310nm and 1330nm
Fiber: Single-mode fiber
Connector: Duplex LC
Distance: Up to 10km
Power consumption: Below 3.5W according to the published product specification
Its four-channel CWDM architecture is suitable for longer-distance enterprise and data center links. For Aruba replacement projects, verify the exact LR4 interoperability requirements and host recognition behavior.
The C-LIGHT 100G QSFP28 family includes the CL100GQSFPCW4 module for 2km single-mode transmission.
Data rate: 100Gbps
Wavelength: Four CWDM channels across the 1270nm–1330nm range
Fiber: Single-mode fiber
Connector: LC
Distance: 2km configuration
Application: Data center and enterprise optical uplinks
This option is relevant to networks that require a 100G CWDM4 optical interface. It should be selected only when the remote endpoint and HPE Aruba port support the same optical standard.
For longer single-mode links, C-LIGHT provides multiple LAN-WDM QSFP28 configurations through its 100G QSFP28 product series.
| Part Number | Optical Type | Fiber | Distance | Connector |
|---|---|---|---|---|
| CL100GQSFPSER4 | 100G ER4 | SMF | 40km | LC |
| CL100GQSFPSER4-60 | 100G extended-reach | SMF | 60km | LC |
| CL100GQSFPSZR4 | 100G ZR4 | SMF | 80km, FEC-free specification | LC |
| CL100GQSFPXZR4 | 100G extended ZR4 | SMF | 100km | LC |
These longer-reach products are intended for specific optical link budgets and system conditions. They should not be treated as direct substitutes for 10km LR4 or 40km ER4L modules without checking the optical specifications, host power capability, FEC requirements, and link design.
The C-LIGHT 100G QSFP28 Single Lambda series uses single-wavelength PAM4 technology for 100G optical transmission.
| Part Number | Optical Type | Wavelength | Distance | Connector |
|---|---|---|---|---|
| CL100GQSFPDR1 | DR1 | 1310nm | 500m | LC |
| CL100GQSFPFR1 | FR1 | 1310nm | 2km | LC |
| CL100GQSFPLR1 | LR1 | 1310nm | 10km | LC |
| CL100GQSFPER1 | ER1 | 1310nm | 40km | LC |
Single Lambda modules have different optical signaling characteristics from traditional four-wavelength LR4 and ER4 designs. Confirm that the target HPE Aruba platform and remote endpoint support the relevant single-wavelength standard before selecting these products.
C-LIGHT's broader optical transceiver portfolio also includes 100G BiDi QSFP28, OTU4 QSFP28, and DWDM solutions for specialized fiber utilization and optical transport applications.
10. HPE Aruba 100G QSFP28 Interoperability Testing Procedure
For network operators deploying third-party 100G QSFP28 modules, structured testing helps distinguish host-recognition problems from optical or fiber-related issues.
A complete validation process should include the following stages.
Module identification
Record the transceiver manufacturer and part number.
Read the module EEPROM identification information.
Verify QSFP28 interface and supported data rate.
Check whether the HPE Aruba switch recognizes the module.
Record any unsupported-module messages or interface warnings.
Port and software verification
Record the exact Aruba switch model and hardware revision.
Check the installed AOS-CX software release.
Verify the selected port supports 100G operation.
Confirm that the interface is not configured for an incompatible breakout mode.
Review platform-specific transceiver restrictions.
Optical interface testing
Verify wavelength and optical standard at both endpoints.
Confirm the correct multimode or single-mode fiber type.
Check MPO/MTP polarity or duplex LC fiber routing.
Measure transmitter and receiver optical power.
Verify that received power is within the specified operating range.
Traffic and stability testing
Confirm the interface establishes a 100GbE link.
Run sustained bidirectional traffic tests.
Monitor packet loss, CRC errors, and interface counters.
Check link stability during extended operation.
Verify recovery after port resets and switch reboots.
| Test Category | Key Parameters | Validation Objective |
|---|---|---|
| Module recognition | EEPROM, vendor ID, part number | Confirm host recognition and identification. |
| Port configuration | Port speed, interface mode, breakout state | Confirm correct 100G port operation. |
| Optical performance | TX power, RX power, wavelength | Verify optical specifications and link budget. |
| Digital diagnostics | Temperature, voltage, bias current, optical power | Confirm monitoring functionality. |
| Traffic performance | BER, packet loss, CRC errors | Evaluate end-to-end data transmission. |
| Long-duration operation | Link state and error counters | Check sustained stability. |
Testing should use the actual switch model, software version, port configuration, and intended remote endpoint. A successful test on one Aruba CX model should not automatically be generalized to every switch in the Aruba product family.
11. Common 100G QSFP28 Compatibility Problems
When a 100G QSFP28 link fails to establish, the cause may be related to module identification, software support, port configuration, optical mismatch, or fiber installation.
| Observed Problem | Potential Cause | Recommended Check |
|---|---|---|
| Transceiver not recognized | Unsupported coding, module identification, or platform restriction | Check EEPROM data and the HPE Aruba transceiver guide. |
| Port remains down | Unsupported optical type or incorrect port configuration | Verify port mode, module type, and software release. |
| SR4 link fails | Incorrect MPO polarity or unsuitable multimode fiber | Check fiber mapping, connector condition, and fiber grade. |
| LR4 link fails | Optical mismatch or incorrect LC fiber routing | Confirm matching LR4 endpoints and duplex polarity. |
| Low receive power | High fiber attenuation, dirty connectors, or damaged patch cords | Measure optical power and inspect the fiber path. |
| Breakout ports do not operate | Unsupported port split or incorrect interface configuration | Check hardware breakout support and software requirements. |
| Intermittent link interruptions | Thermal, power, optical, or physical connection problems | Review DOM/DDM data and interface error counters. |
| DOM/DDM information unavailable | Host or module diagnostic limitations | Check SFF-8636 support and switch software capabilities. |
One important point is that a recognized transceiver is not necessarily a fully validated transceiver. Host recognition confirms only part of the compatibility process. Optical link establishment and sustained traffic performance must also be evaluated.
12. Selecting a 100G QSFP28 Module for HPE Aruba Switches
The correct module depends on the network's fiber infrastructure, transmission distance, optical architecture, and switch compatibility requirements.
| Network Requirement | Potential Optical Choice | Important Selection Factor |
|---|---|---|
| Short-distance multimode connectivity | 100G SR4 | 850nm optics, MPO/MTP interface, and OM3/OM4 fiber. |
| Short-distance single-mode links | 100G DR | Supported DR interface and single-mode fiber configuration. |
| Single-mode links around 2km | 100G CWDM4 or FR1 | Confirm the optical standard at both ends. |
| Single-mode links up to 10km | 100G LR4 or LR1 | Check wavelength architecture and receiver requirements. |
| Extended-reach links around 40km | 100G ER4L or ER4 | Verify optical power budget and host support. |
| Long-distance optical transport | 100G ZR4 or DWDM | Check FEC, optical budget, power consumption, and system design. |
For replacement projects, the original HPE transceiver SKU is a useful starting point. Engineers should also record the switch model, software release, port number, fiber type, link distance, and remote transceiver model.
For new deployments, it is preferable to select the optical standard based on the complete link architecture rather than choosing a module solely by its maximum advertised distance.
13. C-LIGHT 100G QSFP28 Compatibility Support for HPE Aruba
C-LIGHT's 100G QSFP28 product family covers a broad range of optical transmission requirements, including short-reach multimode links, 2km and 10km single-mode connections, and extended-reach optical applications.
For HPE Aruba network projects, product selection can be organized around the following requirements:
Switch identification: Exact Aruba CX switch model and hardware revision.
Original module: HPE part number and optical standard.
Port configuration: Native 100G operation or supported breakout mode.
Fiber infrastructure: Multimode or single-mode fiber and connector type.
Transmission distance: Required reach and available optical power budget.
Host requirements: Module coding, firmware, power consumption, and management support.
Validation: Recognition, optical performance, traffic stability, and diagnostic monitoring.
Relevant product families include the C-LIGHT 100G QSFP28 optical transceiver series, 100G QSFP28 Single Lambda, and 100G BiDi QSFP28.
For specialized long-distance links, the C-LIGHT 100G DWDM QSFP28 solutions provide additional optical transport options.
C-LIGHT supports compatibility-oriented product selection and technical evaluation for multi-vendor network environments. Exact HPE Aruba switch compatibility should be confirmed for the required model, software release, and transceiver configuration before deployment.
14. Conclusion
100G QSFP28 transceiver compatibility with HPE Aruba switches depends on more than the physical interface. Switch hardware, AOS-CX software, supported optical standards, module coding, port configuration, and fiber infrastructure all influence successful operation.
Aruba CX 8325 and 8360 platforms support a range of 100G optical options, including SR4, LR4, CWDM4, ER4L, DR, and FR1 modules on applicable hardware and software configurations. Each optical type has different wavelength, connector, fiber, and transmission-distance requirements.
For third-party transceivers, a complete validation process should include module recognition, optical power measurement, DOM/DDM monitoring, port configuration checks, and sustained traffic testing. Compatibility established on one switch model should not be assumed to apply to every Aruba platform.
C-LIGHT offers 100G QSFP28 SR4, LR4, CWDM4, ER4, ZR4, Single Lambda, and other optical solutions for different network architectures. Selecting the correct module and verifying it against the target HPE Aruba platform can help improve deployment reliability and simplify future network expansion.
For HPE Aruba-compatible 100G QSFP28 optical transceivers, product specifications, and customized interoperability support, visit the C-LIGHT Optical Transceiver Portfolio or Contact C-LIGHT.
TEL:+86 132 6656 7067




















































>
>
>
>
>
>
>
>