C-LIGHT telephone TEL:+86 132 6656 7067    
Language
C-LIGHT search

RoCE vs Ethernet for AI Networking

By C-LIGHT Marketing 丨 Jul 30, 2025
Table of Contents

    AI networking places different demands on Ethernet infrastructure than conventional enterprise applications. GPU clusters exchange large volumes of data between servers during distributed training, model synchronization, and collective communication. Delays in these transfers can leave expensive GPU resources waiting for network operations to finish.

    RoCE (RDMA over Converged Ethernet) addresses this challenge by bringing Remote Direct Memory Access (RDMA) capabilities to Ethernet networks. It reduces dependence on conventional host networking operations and enables efficient data movement between servers. However, RoCE does not replace Ethernet. It uses Ethernet as its underlying network and changes how applications transfer data across it.

    The practical comparison is therefore between RoCE-based RDMA communication and conventional TCP/IP communication over Ethernet. Their differences involve data transfer architecture, CPU utilization, latency, reliability, congestion management, and deployment requirements.

    1. Why AI Networking Needs More Than Conventional Ethernet

    Traditional Ethernet has long provided the connectivity foundation for enterprise networks, cloud platforms, and data centers. It handles application traffic such as web requests, database connections, storage access, and server communication effectively.

    AI clusters introduce a different communication pattern. During distributed training, multiple GPUs process different portions of a model and exchange intermediate results. These transfers often occur simultaneously across many servers.

    Common AI communication operations include:

    • All-Reduce: Combines distributed data, such as gradients, across multiple GPUs.

    • All-Gather: Collects data from multiple participating GPUs and distributes the combined result.

    • Reduce-Scatter: Reduces distributed data and sends the corresponding portions to different GPUs.

    • Tensor parallelism: Exchanges intermediate tensors between GPUs working on different parts of a model.

    • Pipeline parallelism: Transfers activations and gradients between different model stages.

    These operations can generate intensive east-west traffic between servers. If network communication becomes inefficient, GPU synchronization takes longer and overall training throughput may decline.

    AI networking therefore needs more than high link speeds. It also needs low communication overhead, predictable latency, efficient congestion control, and sufficient bandwidth across the entire fabric.

    2. What Is Traditional Ethernet Networking?

    Ethernet is a family of networking technologies standardized primarily through IEEE 802.3. It defines how devices communicate over Ethernet links and supports a wide range of data rates, from conventional access networks to high-speed data center fabrics.

    In a typical TCP/IP Ethernet application, the application uses a socket interface to exchange data. The operating system's networking stack processes TCP and IP traffic, while the network adapter and switches handle transmission across the physical network.

    2.1 How Conventional TCP/IP Ethernet Communication Works

    A simplified TCP communication process includes:

    1. The sender establishes a TCP connection with the destination.

    2. The application passes data to the operating system's TCP stack.

    3. TCP segments the data and adds sequence and control information.

    4. IP handles addressing and packet forwarding.

    5. Ethernet carries the packets across the network.

    6. The receiver processes the packets, reassembles the ordered byte stream, and delivers data to the application.

    TCP provides reliable, ordered data delivery through acknowledgments, sequence numbers, retransmissions, and congestion control.

    Modern network adapters and operating systems can accelerate TCP processing through technologies such as TCP Segmentation Offload (TSO), Generic Receive Offload (GRO), and Receive Side Scaling (RSS). Therefore, conventional Ethernet networking is not necessarily limited by software processing in every deployment.

    2.2 Where Traditional Ethernet Is Commonly Used

    • Web applications and application servers.

    • Database connections and enterprise software.

    • Cloud management and orchestration.

    • General-purpose storage and file transfers.

    • Control-plane and management traffic.

    • Conventional data center communication.

    These applications benefit from Ethernet's broad compatibility, mature operational tools, and extensive hardware ecosystem.

    3. What Is RoCE?

    RoCE stands for RDMA over Converged Ethernet. It enables RDMA communication over Ethernet networks, allowing data to move between registered memory regions on different systems with reduced involvement from the conventional operating system networking stack.

    RoCE is particularly useful when applications exchange large amounts of data between servers and need to reduce communication overhead. It is therefore relevant to AI training, high-performance computing, distributed storage, and other data-intensive workloads.

    3.1 RoCEv1 vs RoCEv2

    There are two main RoCE versions:

    • RoCEv1: Encapsulates RDMA transport directly over Ethernet Layer 2. It is limited to the same Layer 2 broadcast domain.

    • RoCEv2: Encapsulates RDMA transport packets in UDP/IP, allowing the traffic to be routed across Layer 3 networks.

    RoCEv2 is generally the more relevant version for modern data center fabrics because it supports IP routing and larger network architectures.

    RoCEv2 uses UDP destination port 4791. Although UDP is used for encapsulation, RoCEv2 is not simply ordinary best-effort UDP application traffic. RDMA transport services provide their own delivery and reliability behavior.

    3.2 How RoCEv2 Works

    RoCEv2 relies on RDMA-capable network adapters, commonly called RNICs. These adapters process RDMA operations in hardware and transfer data between registered memory regions.

    A simplified data transfer process is:

    1. The application prepares and registers memory regions for RDMA operations.

    2. The sender posts an RDMA work request to its RNIC.

    3. The RNIC processes the operation and encapsulates the RDMA transport packet in UDP/IP and Ethernet headers.

    4. Ethernet switches and IP routers forward the packet through the network.

    5. The destination RNIC processes the operation and places the data into the appropriate memory region.

    6. The receiving application accesses the transferred data according to the RDMA operation and completion mechanism.

    Much of the data movement is handled by the network adapters, reducing the need for conventional CPU-based packet processing.

    4. RoCE vs Traditional Ethernet: Key Differences

    RoCE and Ethernet are not competing physical network technologies. RoCE uses Ethernet as its transport infrastructure. The following comparison focuses on RoCE-based RDMA communication versus conventional TCP/IP communication over Ethernet.

    Comparison PointRoCETraditional TCP/IP Ethernet
    Primary purposeRDMA-based data transfer over EthernetGeneral-purpose application communication
    Transport approachRDMA transport over UDP/IP in RoCEv2TCP over IP
    Data transferDirect memory access between registered memory regionsConventional application and operating system networking interfaces
    CPU involvementReduced through RNIC hardware offloadGenerally more host networking stack processing, depending on offloads
    LatencyDesigned for low-overhead communicationDepends on TCP processing, hardware acceleration and application design
    ReliabilityDepends on the selected RDMA transport serviceTCP provides reliable, ordered byte-stream delivery
    Congestion managementMay use ECN, DCQCN and PFC depending on deploymentUses TCP congestion control and optional ECN
    Network infrastructureEthernet switches, RDMA-capable RNICs and compatible configurationStandard Ethernet switches, routers and network adapters
    RoutingRoCEv2 supports Layer 3 routingIP routing is widely supported
    Typical workloadsAI training, GPU clusters, HPC and RDMA storageWeb services, databases, cloud applications and general data traffic
    Deployment requirementsRequires RDMA hardware and careful network engineeringGenerally easier to deploy in existing Ethernet environments

    The key distinction is not that one uses Ethernet and the other does not. Both use Ethernet links. The difference is how data is transferred, how much processing is handled by the host, and how the network manages high-performance traffic.

    5. RDMA: The Main Architectural Difference

    RDMA is the technology that separates RoCE communication from conventional TCP/IP socket communication.

    5.1 Conventional TCP/IP Data Movement

    In a traditional TCP application, data typically passes through the application, operating system networking stack, and network adapter. Depending on the operating system and hardware, additional memory copies, protocol processing, interrupts, and scheduling operations may be involved.

    Modern offload technologies can reduce some of this work, but the conventional socket-based communication model still differs from an RDMA data path.

    5.2 Direct Memory Access with RoCE

    With RoCE, the RNIC handles RDMA operations in hardware. Once memory regions and access permissions are properly registered, the network adapter can transfer data directly between the participating systems' memory regions.

    This reduces host CPU involvement in the data path and can improve communication efficiency for applications that frequently exchange large amounts of data.

    5.3 Why This Matters for AI Workloads

    GPU servers have substantial computational resources, but CPU resources are also needed for data preparation, orchestration, scheduling, and system management.

    Reducing networking overhead can free CPU resources for other tasks and help maintain efficient communication between compute nodes. The actual improvement depends on the application, network hardware, message sizes, and communication pattern.

    6. Latency, Throughput and CPU Utilization

    RoCE is designed to reduce communication overhead, but its performance advantages should be evaluated in the context of the complete network and application.

    6.1 Latency

    RDMA can reduce latency by avoiding some conventional host networking operations. This is particularly useful for applications that exchange data frequently and are sensitive to communication delays.

    Traditional TCP communication can also deliver strong performance, especially with modern NIC offloads and optimized software. However, RoCE is designed for applications that need a more direct data transfer path.

    6.2 Throughput

    Both RoCE and TCP/IP can use high-speed Ethernet links, including 100G, 200G, 400G, and 800G interfaces where supported.

    RoCE does not automatically increase the physical bandwidth of an Ethernet port. Instead, it changes the data transfer mechanism and can help applications use available network capacity more efficiently.

    Actual throughput depends on link speed, packet size, switch capacity, traffic distribution, congestion, and the performance of the endpoints.

    6.3 CPU Utilization

    RoCE uses RNIC hardware offload to handle much of the RDMA data movement. This can reduce CPU utilization for communication-intensive applications.

    TCP performance can also benefit from hardware acceleration. However, conventional TCP socket communication and RDMA-based data transfer have different processing paths, so the performance comparison should use the actual application rather than isolated protocol assumptions.

    7. Congestion Control in RoCE Ethernet Networks

    Congestion management is one of the most important parts of a production RoCE deployment. AI clusters often generate synchronized traffic, with many GPUs sending data simultaneously toward shared network destinations.

    When traffic arrives faster than a switch port can transmit it, queues build up. This can increase latency, reduce throughput, and affect communication across the GPU cluster.

    7.1 Explicit Congestion Notification (ECN)

    ECN allows network devices to signal congestion without immediately dropping packets. When a switch detects congestion, it can mark eligible packets to indicate that the network is experiencing pressure.

    The receiving endpoint processes this information and can participate in a congestion response mechanism that causes the sender to reduce its transmission rate.

    7.2 DCQCN

    DCQCN stands for Data Center Quantized Congestion Notification. It is a congestion-control mechanism commonly associated with RoCE deployments.

    In a typical DCQCN process:

    1. A switch detects congestion in an output queue.

    2. The switch marks packets with ECN information.

    3. The receiving RNIC detects the congestion indication.

    4. The receiver sends a Congestion Notification Packet (CNP) to the sender.

    5. The sender adjusts its transmission rate to reduce pressure on the network.

    This mechanism allows RoCE endpoints to respond to congestion before packet loss becomes widespread.

    7.3 Priority Flow Control (PFC)

    PFC is an Ethernet flow-control mechanism that pauses traffic for a selected priority when buffer pressure becomes high. It is used in some RoCE deployments to help prevent packet loss for RDMA traffic.

    However, PFC is not a universal requirement for every RoCE network. Poorly designed PFC configurations can cause head-of-line blocking, pause propagation, or pause storms that affect unrelated traffic sharing the same priority.

    Modern RoCE network design should evaluate ECN, DCQCN, PFC, switch buffering, and traffic engineering together. The goal is controlled congestion management, not simply enabling every available flow-control feature.

    7.4 Why Congestion Configuration Matters

    A RoCE network may use high-speed switches and adapters yet still perform poorly if congestion settings are inconsistent.

    Important configuration and validation areas include:

    • Consistent QoS and traffic classification.

    • Appropriate ECN marking thresholds.

    • Correct PFC priority mapping where PFC is used.

    • Switch buffer allocation and queue management.

    • RNIC congestion-control configuration.

    • Routing and load-balancing behavior.

    • Network telemetry and congestion monitoring.

    8. Network Infrastructure Requirements

    RoCE uses Ethernet infrastructure, but a high-performance RDMA network needs more than ordinary switch connectivity.

    8.1 RoCE Infrastructure

    A typical RoCEv2 deployment includes:

    • Servers with RoCE-capable network adapters.

    • Ethernet switches supporting required QoS and congestion-management features.

    • IP addressing and Layer 3 routing where needed.

    • Consistent MTU and traffic classification settings.

    • ECN and congestion-control configuration.

    • Compatible NIC drivers, firmware, switch software and operating systems.

    The exact requirements depend on the RNIC vendor, switch platform, software stack, and network design.

    8.2 Conventional Ethernet Infrastructure

    Traditional TCP/IP communication generally requires fewer specialized components. Standard Ethernet switches, network adapters, IP routing, and established operating system networking stacks are sufficient for most general-purpose applications.

    This makes conventional Ethernet easier to integrate into existing enterprise and cloud environments.

    8.3 Can RoCE and TCP/IP Share the Same Ethernet Network?

    Yes. RoCE and conventional TCP/IP traffic can coexist on Ethernet infrastructure. However, traffic classification, QoS, congestion management, and bandwidth allocation must be designed carefully.

    For large AI clusters, operators may choose to separate GPU backend traffic from frontend, management, and storage traffic through dedicated fabrics, logical segmentation, or separate network resources.

    9. RoCE for AI Training and GPU Clusters

    RoCE is especially relevant to AI networks because distributed training depends on frequent communication between GPUs across multiple servers.

    9.1 Distributed Training

    During distributed training, GPUs exchange gradients, model parameters, and intermediate data. RDMA can reduce communication overhead and help improve the efficiency of these transfers.

    RoCE provides this capability over Ethernet, making it a practical option for organizations building Ethernet-based GPU clusters.

    9.2 NCCL Communication

    NVIDIA Collective Communications Library (NCCL) supports communication operations such as All-Reduce, All-Gather, Reduce-Scatter, and Broadcast across GPUs.

    In multi-node environments, NCCL can use supported RDMA networking paths, including RoCE, depending on the GPU platform, network adapters, drivers, and configuration.

    For a real deployment, network performance should be tested using the same collective communication patterns and message sizes generated by the target AI workload.

    9.3 GPU Direct RDMA

    GPUDirect RDMA allows compatible network adapters to access GPU memory directly, reducing unnecessary data copies through host memory.

    When the GPU, RNIC, driver, firmware, and software stack support the feature, RoCE can be used as the network transport for GPUDirect RDMA communication.

    This is an important reason RoCE is considered for large Ethernet-based GPU clusters. It provides a path for direct GPU memory communication without requiring an InfiniBand physical fabric.

    10. RoCE vs Ethernet: Which Applications Need RDMA?

    Not every application benefits equally from RoCE. The value of RDMA depends on how frequently an application exchanges data, how much data it transfers, and how sensitive it is to communication overhead.

    ApplicationTypical Networking ApproachReason
    Distributed AI trainingRoCE or other RDMA-based networkingFrequent inter-node synchronization and large data transfers
    GPU cluster communicationRoCE where supportedLow-overhead data movement between compatible systems
    HPC workloadsRoCE or other high-performance interconnectsCommunication-intensive parallel computing
    RDMA-based storageRoCE where supportedEfficient data movement between storage and compute nodes
    Web applicationsTraditional TCP/IP EthernetBroad compatibility and conventional application communication
    Database servicesUsually TCP/IP EthernetMost database applications use established TCP-based interfaces
    Management and orchestrationTraditional TCP/IP EthernetGeneral-purpose control and management traffic

    A hybrid network architecture is often practical. RoCE can serve communication-intensive GPU and storage workloads, while conventional TCP/IP handles management, application, and general-purpose traffic.

    11. Optical Connectivity for RoCE-Based AI Networks

    RoCE does not define the optical transmission technology. It operates over Ethernet, so its physical links use Ethernet-compatible optical transceivers, DAC cables, or active optical cables.

    The optical component must match the switch and network adapter interface, supported Ethernet data rate, transmission distance, fiber type, and connector. A transceiver provides the physical optical link; it does not itself implement RDMA or congestion control.

    11.1 400G and 800G Ethernet Optical Transceivers

    As GPU clusters expand, 400G and 800G Ethernet links provide the bandwidth needed for high-capacity switch connections and large-scale data center fabrics.

    C-LIGHT offers 400G QSFP-DD optical transceivers for high-speed Ethernet connectivity. For newer AI network deployments, the 800G QSFP-DD optical transceiver portfolio supports next-generation Ethernet infrastructure, with different optical configurations and transmission distances depending on the model.

    11.2 Active Optical Cables for Short-Reach Links

    Active Optical Cables integrate optical components into a cable assembly, providing a convenient solution for short-reach connections between switches and computing equipment.

    C-LIGHT's 800G AOC product family supports QSFP-DD and OSFP configurations for high-density data center connectivity. The portfolio includes standard and breakout configurations for different network architectures.

    When selecting an AOC for RoCE, verify that the exact cable configuration matches the Ethernet interface and equipment requirements. The nominal data rate and connector form factor alone are not sufficient to establish compatibility.

    11.3 Optical Link Selection Checklist

    • Confirm the Ethernet port speed and standard.

    • Verify QSFP-DD, OSFP or other required form factor.

    • Match optical reach and fiber type.

    • Check the connector and breakout configuration.

    • Confirm switch and RNIC compatibility.

    • Validate cable length and link budget.

    12. How to Evaluate a RoCE Network for AI

    A successful RoCE deployment should be evaluated using actual application workloads rather than relying only on theoretical link bandwidth.

    Network validation should include:

    1. RNIC verification: Confirm that the network adapters support the intended RoCE version and RDMA features.

    2. Connectivity testing: Verify RDMA communication between representative GPU servers.

    3. Bandwidth testing: Measure throughput across individual links and multiple nodes.

    4. Latency testing: Evaluate latency and tail latency under different traffic conditions.

    5. Congestion testing: Generate simultaneous traffic to observe ECN, CNP, PFC and queue behavior.

    6. NCCL testing: Run collective communication benchmarks that represent the target AI workloads.

    7. Application testing: Measure actual training throughput and GPU utilization.

    Useful tools include RDMA performance utilities, network telemetry platforms, and NVIDIA NCCL Tests for evaluating collective communication performance.

    It is also important to confirm that applications are using the intended RDMA path. If communication falls back to conventional TCP/IP, benchmark results may not accurately represent RoCE performance.

    13. Conclusion

    RoCE and Ethernet should not be viewed as two competing physical networking technologies. RoCE is an RDMA technology that operates over Ethernet, providing a more direct data transfer mechanism for communication-intensive applications.

    Conventional TCP/IP Ethernet remains an effective foundation for general-purpose data center traffic, including web services, databases, management, and enterprise applications. RoCE adds value when workloads require low-overhead data movement, high communication efficiency, and RDMA support.

    For AI clusters, RoCEv2 can provide RDMA communication over routed Ethernet networks and support GPU-to-GPU data exchange when the hardware and software stack are compatible. However, its performance depends on network design, congestion management, RNIC capabilities, and application behavior.

    The most practical architecture is often a carefully engineered Ethernet fabric that assigns RoCE to workloads that benefit from RDMA while retaining conventional TCP/IP for general network services. Matching the transport method to the workload is more important than treating one as a universal replacement for the other.

    Frequently Asked Questions

    Q1: Is RoCE the same as Ethernet?

    No. RoCE is an RDMA technology that operates over Ethernet. Ethernet provides the underlying network, while RoCE changes the data transfer mechanism.

    Q2: What is the main difference between RoCE and TCP/IP Ethernet?

    RoCE enables RDMA-based memory transfers with reduced host networking overhead. Conventional TCP/IP applications use the TCP socket and operating system networking stack.

    Q3: Does RoCE use UDP or TCP?

    RoCEv2 uses UDP/IP encapsulation rather than TCP. Its RDMA transport layer provides the relevant transport services.

    Q4: Why is RoCE used in AI networking?

    RoCE can reduce communication overhead and support efficient data exchange between GPU servers during distributed training and other data-intensive workloads.

    Q5: Does RoCE require special network adapters?

    Yes. RoCE requires network adapters with compatible RDMA capabilities, along with appropriate drivers, firmware, and switch support.

    Q6: Does RoCEv2 require PFC?

    Not universally. Some deployments use PFC together with ECN, while others use different congestion-management designs. The configuration depends on the network architecture.

    Q7: Can RoCEv2 work across Layer 3 networks?

    Yes. RoCEv2 uses UDP/IP encapsulation and supports routing across Layer 3 networks.

    Q8: Can RoCE support GPUDirect RDMA?

    Yes. Compatible GPUs, RNICs, drivers, and software platforms can support GPUDirect RDMA over RoCE.

    Q9: Can RoCE and TCP/IP share the same Ethernet infrastructure?

    Yes. They can coexist when traffic classification, QoS, congestion management, and bandwidth allocation are properly configured.

    Q10: Does RoCE require 400G or 800G Ethernet?

    No. RoCE can operate at different supported Ethernet speeds. The appropriate bandwidth depends on the workload, cluster size, network topology, and available hardware.

    For any questions, please contact us by email or WhatsApp.

    Email: sales@c-light.com

    WhatsApp: +86 132 6656 7067

    Related Articles

    Call
    Top