TEL：+86 158 1857 3751 
C-LIGHT CLFC3004X is a slave ONU designed for FTTR (Fiber-to-the-Room) deployments, integrating WiFi6 high-speed wireless and multi-gigabit wired interfaces to deliver all-optical networking for homes and SMEs.
Key advantages include:
●WiFi6 3000Mbps Dual-Band: 2.4GHz (574Mbps) + 5GHz (2402Mbps) with OFDMA and MU-MIMO, reducing latency in high-density environments.
●Low Power Consumption: ≤8W total power, 40% more efficient than legacy devices.
●Compact Design: Slim 185×130×26mm chassis for wall/desktop mounting.
●Hardware Performance & Use Cases
All-Optical Access & Multi-Service Support
XGPON Uplink: 2.5Gbps fiber uplink for 8K streaming, VR/AR, and other bandwidth-intensive applications.
4×Gigabit Ethernet Ports: Connect PCs, NAS, and IP cameras with wired stability.
●Environmental Adaptability
Wide-Temperature Operation (-5°C to 45°C): Reliable performance in non-climate-controlled spaces like attics or utility rooms.
Anti-Interference Design: RF shielding and smart channel selection minimize interference from microwaves/Bluetooth devices.
●Intelligent Networking
Mesh Expansion: Acts as an FTTR slave node for seamless roaming (<30ms handover="">
QoS Prioritization: Ensures low latency for gaming/video traffic.
●Key Applications
Large Homes/Villas
Eliminate WiFi dead zones in 120㎡+ spaces via FTTR architecture.
SME Office Networks
Support high-density wired/wireless devices (projectors, IP phones, tablets).
Smart Home Hub
Stable connectivity for IoT devices (security cameras, smart locks).
●Why Choose C-LIGHT CLFC3004X FTTR Slave ONU?
Cost & Energy Efficiency
60% lower cost vs. traditional router+switch setups.
Easy Maintenance
Remote optical power monitoring and firmware upgrades reduce on-site visits.
Future-Proofing
10G PON-ready for seamless upgrades to 10G fiber networks.
If you are interested in the FTTR Slave ONU, please contact us
