C-LIGHT telephone TEL:+86 132 6656 7067    
Language
C-LIGHT search
What Is LRO>
By C-LIGHT Marketing 丨
LRO (Linear-drive Receive Optics) uses a linear optical receiver architecture to reduce power and latency in high-speed optical modules, especially for 400G and 800G data center links.
Why Liquid Cooling AOC Requires Waterproof Fiber Jackets and Potting Compounds for AI Data Centers>
By C-LIGHT Marketing 丨
Learn why Liquid Cooling Active Optical Cables (AOCs) require waterproof fiber jackets, UV-resistant materials, and high-reliability potting compounds.
What Is NPO?>
By C-LIGHT Marketing 丨
NPO (Near-Packaged Optics) places optical engines close to the host ASIC on the PCB, shortening high-speed electrical paths and reducing signal loss for high-bandwidth networks.
What Is an AOC Cable?>
By C-LIGHT Marketing 丨
AOC (Active Optical Cable) is a high-speed cable assembly that uses optical fiber and integrated transceivers to transmit data over longer distances than copper cables.
What Is Multimode Fiber?>
By C-LIGHT Marketing 丨
Multimode fiber is an optical fiber designed to carry multiple light modes, commonly used for short-distance data center, enterprise, and high-speed network connections.
What Is RIN?>
By C-LIGHT Marketing 丨
RIN (Relative Intensity Noise) measures fluctuations in laser optical power and is an important parameter for high-speed optical transmitters and optical communication systems
What Is OSNR?>
By C-LIGHT Marketing 丨
OSNR (Optical Signal-to-Noise Ratio) measures the ratio of optical signal power to noise power and is a key performance parameter in DWDM and coherent optical networks.
What Is Pre-FEC BER?>
By C-LIGHT Marketing 丨
Pre-FEC BER is the bit error rate measured before Forward Error Correction, showing the raw error performance of a high-speed optical communication link.

Call
Top