TEL：+86 132 6656 7067 
The C-LIGHT CL-IMC208SGP-SFP is an 8-port industrial managed PoE switch designed for harsh environments. Featuring a compact aluminum housing (95×63×46mm, 0.3kg) and an operating temperature range of -40°C to 75°C, it is ideal for smart transportation, industrial automation, and outdoor security applications. With 8×RJ45 PoE+ ports (30W per port, total power<240w)<>
Core Technical Advantages
1. Industrial-Grade Hardware Design
●Aluminum Housing & Thermal Optimization: IP40-rated metal casing resists EMI, while passive cooling reduces failure rates in high-temperature environments.
●Wide-Temperature Operation (-40°C to 75°C): Suitable for extreme conditions in railways, oil fields, and outdoor base stations, etc.
●High Reliability (MTBF>200,000 hours): Industrial-grade components ensure 24/7 stability.
2. Redundant Power & Efficient PoE
●Dual 48~57VDC Input (4-pin terminal): Redundant power backup eliminates single-point failures.
●Smart PoE Management:
●30W max per port (IEEE 802.3at compliant), total PoE budget ≤240W, powers IP cameras, wireless APs, and industrial sensors.
●Configurable PoE prioritization optimizes power allocation during overloads.
3. Flexible Networking & Management
●Dual Gigabit SFP Uplinks: Supports single-mode/multi-mode modules for up to 80km transmission (module-dependent).
L2+ Management Features:
●VLAN, QoS, and STP/RSTP/MSTP protocols for industrial traffic optimization.
●SNMPv3, Web/CLI management enables remote monitoring and troubleshooting.
4. Low Power Consumption
●Max system power 5W, PoE conversion efficiency ≥90%, reducing OPEX.
Key Application Scenarios
1. Intelligent Transportation Systems (ITS)
●Powers traffic cameras, electronic signage, and vehicle sensors in extreme outdoor temperatures (-40°C to 75°C).
2. Industrial Automation Networks
●Ensures uninterrupted operation of PLCs and robotic arms via redundant power in factory floors.
3. Surveillance Networks
●Delivers PoE+ to 4K cameras and fiber backhaul for high-bandwidth, low-latency video transmission.
4. Remote Area Connectivity
●Integrates with solar power systems to provide PoE and fiber uplinks for rural IoT deployments.
Why Choose C-LIGHT CL-IMC208SGP-SFP?
1. Industrial Compliance
●Meets IEC 61850-3 (power automation) and EN 50155 (railway) standards, with EMC/ESD certifications.
2. Cost Efficiency
●40% smaller size and 30% lower power consumption versus traditional industrial switches.
3. Rapid Deployment
●DIN rail/wall-mountable design enables installation within 5 minutes; hot-swappable modules simplify maintenance.
Installation & Maintenance
1.Installation Tips:
●Avoid direct exposure to rain or excessive dust (use with an enclosure).
●Use shielded twisted-pair cables (Cat5e or higher) to minimize signal loss.
2.Maintenance Strategy:
●Monitor PoE load and temperature via SNMP to prevent overloads.
●Inspect terminal block connections biennially for oxidation.
If you are interested in the Industrial Managed PoE Switch 2-port , please contact us
2-Port Industrial Managed PoE Switch FAQ
Q1: What is a 2-Port Industrial Managed PoE Switch?
A: A 2-Port Industrial Managed PoE Switch is a rugged Ethernet switch designed for harsh industrial environments. It provides Power over Ethernet (PoE) and Gigabit data transmission through a single cable while supporting centralized network management.
Key features include:
IEEE 802.3af/at PoE support
Industrial-grade design
Gigabit Ethernet connectivity
Layer 2 management functions
Wide operating temperature
It is ideal for industrial automation, surveillance, and intelligent transportation systems.
Q2: How does an industrial managed PoE switch work?
A: An industrial managed PoE switch delivers both power and data to connected devices over standard Ethernet cables, eliminating the need for separate power supplies.
The switch also provides advanced management features such as:
VLAN configuration
QoS traffic control
Port monitoring
Network diagnostics
These functions help improve network reliability, simplify maintenance, and ensure stable operation in industrial environments.
Q3: What are the key features of the C-LIGHT industrial managed PoE switch?
A: The C-LIGHT industrial managed PoE switch is designed for reliable operation in demanding industrial environments.
Key features include:
IEEE 802.3af/at PoE support
Gigabit Ethernet ports
Industrial IP-rated metal enclosure
Wide temperature operation
Layer 2 management
Surge and EMC protection
These features ensure stable network performance for industrial automation, security monitoring, and intelligent infrastructure applications.
Q4: What are the advantages of an industrial managed PoE switch?
A: Compared with standard commercial switches, an industrial managed PoE switch offers several advantages.
Reliable Operation in Harsh Environments
Designed to operate under demanding industrial conditions.
Power and Data Integration
Transmits power and network data through a single Ethernet cable.
Remote Network Management
Supports centralized monitoring and configuration.
Lower Installation Costs
Reduces additional power wiring requirements.
High Reliability
Provides stable connectivity for critical industrial applications.
It is an efficient solution for industrial Ethernet deployments.
Q5: Where are industrial managed PoE switches commonly used?
A: Industrial managed PoE switches are widely used in applications requiring reliable power and network connectivity.
Typical applications include:
Industrial Automation
Factory automation systems
Industrial control networks
Machine-to-machine communication
IP Surveillance Systems
Industrial security cameras
Remote video monitoring
High-definition surveillance networks
Intelligent Transportation Systems
Traffic monitoring
Roadside communication equipment
Smart transportation infrastructure
Smart Factory Networks
Industrial IoT devices
Real-time data collection
Production line connectivity
Energy and Utility Networks
Power monitoring systems
Remote equipment management
Outdoor Communication Systems
Outdoor wireless access points
Environmental monitoring equipment
These applications benefit from stable PoE power delivery, industrial reliability, and centralized network management.
Q6: Why is PoE important for industrial networks?
A: Power over Ethernet (PoE) simplifies industrial network deployment by transmitting both power and data through a single Ethernet cable.
Its main benefits include:
Reduced cabling costs
Faster installation
Flexible device placement
Simplified maintenance
Reliable power delivery for IP devices
PoE is especially valuable for industrial devices such as:
IP cameras
Wireless access points
Industrial IoT devices
Remote monitoring equipment
By combining power and communication into one network connection, PoE helps build more efficient and scalable industrial Ethernet systems.
Q7: How do you choose the right industrial managed PoE switch?
A: When selecting an industrial PoE switch, several factors should be considered.
1. PoE Power Requirements
Evaluate:
Total PoE power budget
Power requirements of connected devices
IEEE 802.3af/at/bt compatibility
2. Port Configuration
Consider:
Number of Ethernet ports
Gigabit or Fast Ethernet requirements
Uplink interface requirements
3. Network Management Features
Check support for:
VLAN
QoS
Port monitoring
Network diagnostics
4. Industrial Protection Requirements
Evaluate:
Operating temperature range
Surge protection
EMC protection
Industrial enclosure design
Choosing the right model ensures reliable long-term operation in industrial environments.
Q8: Why choose the C-LIGHT industrial managed PoE switch?
A: The C-LIGHT industrial managed PoE switch combines industrial reliability with intelligent network management capabilities.
It provides:
Stable Gigabit connectivity
Reliable PoE power delivery
Layer 2 network management
Industrial-grade protection
Flexible deployment for harsh environments
With its rugged design and advanced Ethernet features, it is an ideal networking solution for:
Industrial automation
Smart transportation
Security surveillance
Industrial IoT applications
Mission-critical communication networks
The C-LIGHT industrial managed PoE switch helps organizations build reliable, scalable, and future-ready industrial Ethernet infrastructures.
>
>
>
>
>
>
>
>
